Making Connections
Connecting the Telephone Line
You need an RJ11-C type (modular) wall jack to connect the LASER
CLASS 2060 to your telephone system. This is a standard wall jack. If you
do not have this type of jack, contact your local telephone company to
have one installed.
Connect the LASER CLASS 2060 to a telephone line as follows:
1.
Connect one end of the supplied telephone line to the jack marked
on the left side of the LASER CLASS 2060.
2.
Connect the other end of the line to your wall telephone jack.
Chapter 2
Setting Up Your LASER CLASS 2060
2-19
Comments to this Manuals
Latest comments: