Fixing Film Unit; Preparation For Removing The Fixing Film Unit; Removing The Fixing Film Unit - Canon 3370 Series Service Manual

5) Disconnect the 2 connectors [1].
6) Remove the gear [1].
- 1 claw [2]
7) Remove the 2 bosses [3], turn the 2 bushings [4] to the direction of the ar-
row and remove the delivery roller [5].
8) Remove the gear [1].
- 1 claw [2]
9) Remove the 3 screws [3].
F-3-86
F-3-87
F-3-88
10) Remove the 3 screws [1].
11) Slightly open the main body frame to both sides and remove the 2 bosses
[2] on the right and left side plates to remove the fixing assembly [3].

3.5.2 Fixing Film Unit

3.5.2.1 Preparation for removing the fixing film unit

LBP3370 / LBP3310
1) Detach the left cover.(page 3-2)Reference [Detaching the left cover]
2) Detach the right cover.(page 3-1)Reference [Detaching the right cover]
3) Remove the rear cover unit.(page 3-1)Reference [Removing the rear
cover unit]
4) Detach the upper cover unit.(page 3-3)Reference LBP3310 [Detaching
the upper cover](page 3-4)Reference LBP3370 [Detaching the upper
cover]
5) Remove the duplexing drive assembly.(page 3-6)Reference [Removing
the duplexing drive assembly]
6) Remove the video controller PCB.(page 3-10)Reference LBP3310 [Re-
moving the video controller PCB](page 3-11)Reference LBP3370 [Re-
moving the video controller PCB]
7) Remove the fixing assembly.(page 3-17)Reference LBP3310 [Remov-
ing the fixing assembly](page 3-18)Reference LBP3370 [Removing the
fixing assembly]

3.5.2.2 Removing the fixing film unit

LBP3370 / LBP3310
1) Remove the delivery frame unit [1].
- 1 screw [2]
Chapter 3
F-3-89
F-3-90
0018-2986
0018-2987
3-19