Manual Separation Pad; Preparation For Removing The Manual Separation Pad; Removing The Manual Separation Pad; Registration Roller - Canon 3370 Series Service Manual

[1]
[A]

3.4.5 Manual Separation Pad

3.4.5.1 Preparation for removing the manual separation
pad
LBP3370 / LBP3310
1) Detach the left cover.(page 3-2)Reference [Detaching the left cover]
2) Detach the right cover.(page 3-1)Reference [Detaching the right cover]
3) Detach the front cover unit.(page 3-5)Reference [Detaching the front
cover unit]

3.4.5.2 Removing the manual separation pad

LBP3370 / LBP3310
1) While pushing down the mounting part [1] of the separation pad, remove
the separation pad [2] to the upward direction.

3.4.6 Registration Roller

3.4.6.1 Preparation for removing the registration roller

LBP3370 / LBP3310
1) Detach the left cover.(page 3-2)Reference [Detaching the left cover]
2) Detach the right cover.(page 3-1)Reference [Detaching the right cover]
3) Remove the rear cover unit.(page 3-1)Reference [Removing the rear
cover unit]
4) Detach the upper cover unit.(page 3-3)Reference LBP3310 [Detaching
the upper cover](page 3-4)Reference LBP3370 [Detaching the upper
cover]

3.4.6.2 Removing the registration roller

LBP3370 / LBP3310
1) Remove the gear [1].
- 1 claw [2]
[2] [1]
[A]
[B]
[3]
F-3-66
[2]
[1]
F-3-67
2) While pressing the sides [2] of the roller cover [1] to the direction of the
arrow (to disengage the claw [3]), lift the roller cover to remove.
0018-3067
0018-3064
3) Disengage the claw [1] to the forward direction and lift the guide [2] to
remove.
4) Remove the registration roller [1].
0018-2961
- 4 screws [2]
- 1 screw (W sems) [3]
- 1 gear cover [4]
0018-2962
Chapter 3
[2]
[1]
F-3-68
F-3-69
F-3-70
3-15