Harmar Mobility Vantage SL400 Installation And Service Manual page 3

INSTALLATION AND APPLICATION RESTRICTIONS
INCLINE
The maximum inclination (angle) the Vantage lift can be installed is 45 degrees.
The minumum inclination (angle) the Vantage lift can be installed is 25 degrees.
MAXIMUM RAIL LENGTH
32 Feet
LOAD CAPACITY
The maximum load capacity is 300 lbs.
The lift is not to be used to transport cargo.
ELECTRICAL POWER SUPPY REQUIREMENTS
A dedicated 120 VAC 60Hz, 3-wire grounded outlet. NEC requirement.
Electrical equipment shall be certified to the requirements of CAN/CSA B44.1/ASME
A17.5.
ASME 18.1 REQUIREMENTS INSTALLATION REGULATIONS
The Vantage lift is an incline stairway chairlift for private residence use only.
Installation of this lift must comply to American Society of Mechanical Engineers
ASME 18.1 – 2011standards.
• 7.1.1 The structure on which the equipment is installed shall be capable of safely
supporting the loads imposed.
• 7.1.2 The installation of all electrical equipment and wiring shall conform to the
requirements ANSI/NFPA 70.
• 7.6.4 At no point in its travel shall the edge of the footrest facing the upper
landing be more than 24 in. above the step or landing as measured vertically.
TEC0017 23Jan2015 P/N: 630-00027-01 revC
APPLICATION NOTES
SL400 • Vantage Stair Lift Installation Manual
Vantage Stair Lift
3