Table of Contents
Advertisement
Vantage Stair Lift
2. Position the two ends of the rails close together. Connect the plugs on each end of the two power supply
wires inside the rail pieces. [Figure 14-1 and 14-2]
3. Tuck the wire back into the rail channel.
4. Slide the rail onto the splice bars and tighten all
splice bar screws. [Figure 14-3]
Be careful not to pinch wires when
sliding rails together.
CAUTION
14
INSTALLING THE RAIL
Figure 14-1
SPLICE BAR CHANNELS
| www.harmar.com
800-833-0478
Figure 14-2
Figure 14-3
© 2015Harmar Mobility, LLC • All Rights Reserved
Hide quick links:
Advertisement
Table of Contents
