Harmar Mobility Vantage SL400 Installation And Service Manual page 25

7. On the backside of the chassis, there is an on/off
switch. Cut off and discard the shipping tie on the
switch. [Figure 25-1]
8. Turn the switch to the on position. The unit should
beep once when it has completed booting.
NOTE: Refer to page 31 if the unit does not beep once.
9. Use the armrest control switch to run the lift down
the rail approximately 30". [Figure 25-2]
q UNIT DOES NOT OPERATE WHEN SEAT IS ROTATED
q SWIVEL LEVER CONTROL LOCKS INTO PLACE IN ALL THREE POSITIONS
TEC0017 23Jan2015 P/N: 630-00027-01 revC
INSTALLING THE CHAIR
SL400 • Vantage Stair Lift Installation Manual 25
Vantage Stair Lift
Figure 25-1
Figure 25-2