Acorp 4PM266M User Manual page 51

Table of Contents

Bhapter 1

IRQs / Event Activity Monitoring

If you highlight the "Press Enter" next to the "Wake Up

Events" label and then press the enter key, it will take you

to a submenu with the following options:

VGA

When set to On, any event occurring at a VGA port will

awaken a system which has been powered down.

LPT & COM

When set to On, any event occurring at a COM(serial) /

LPT (printer) port will awaken a system which has been

powered down.

HDD & FDD

When set to On(default), any event occurring at a hard or

floppy drive will awaken a system which has been powered

down.

PCI Master

When set to On, any event occurring at a PCI port will

awaken a system which has been powered down.

Modem Ring Resume

To use this function, you need a LAN add-on card which

supports power on function. It should also support the

wake-up on LAN jump. The Choices: Disabled(default).

RTC Alarm Resume

When "Enabled", you can set the date and time at which the

RTC (real-time clock) alarm awakens the system from

Suspend mode.

1 - 1 8

BIOS Settp

Table of Contents