Acorp 4PM266M User Manual page 121

Bhapter 1 Bhapter 1
Bhapter 1 Bhapter 1 Bhapter 1
2.6 Power Management Setup
The Power Management Setup allows you to configure your
system to most effectively save energy while operating in a
manner consistent with your own style of computer use.
◎ ◎ ◎ ◎ ◎ Figure 6. Power Management Setup
CMOS Setup Utility-Copyright (C) 1984-2001 Award Software
ACPI Function
ACPI Suspend Type
Power Management Option
HDD Power Down
Suspend Mode
Video Off Option
Video Off Method
Modem Use IRQ
Soft-Off by PWRBTN
Run VGABIOS if S3 Resume
PWRON After PWR-Fail
IRQ / Event Activity Detect
←→↑↓: Move
F1:General Help
F7:Optimized Defaults
ACPI Function
This item display status of the Advanced Configuration and
Power Management (ACPI).
ACPI Suspend Type
The item allows you to select the suspend type under ACPI
operating system.
S1(POS) (default)
S3(STR)
S1&S3
Power Management Option
This option allows you to set each mode individually.
When not disabled, each of the ranges are from 1 min. to 1
hr. except for HDD Power Down which ranges from 1 min.
to 15 min. and disable.
Power Management Setup
Enter:Select +/-/PU/PD:Value
F5:Previous Values
1 - 1 5 1 - 1 5 1 - 1 5 1 - 1 5 1 - 1 5
Enabled Item Help
S1(POS)
User Define Menu Level
Disabled
Disabled
Suspend->Off
V/H SYNC+Blank
3
Instant-Off
Yes
Off
Press Enter
F10:Save ESC:Exit
F6:Fail-Safe Defaults
Power on Suspend.
Suspend to RAM.
BIOS Settp BIOS Settp
BIOS Settp BIOS Settp BIOS Settp