Acorp 4PM266M User Manual page 11

Table of Contents

Chaosdr 1

1.6 DDR SDRAM Installtion

The motherboard supports a maximized 2GB memory. It provides

two 184-pin unbuffered DDR sockets. It supports 64MB to 1GB

DDR memory module.

DDR DRAM Installation Procedures:

1. The DDR socket has a "Plastic Safety Tab" and the DDR

memory module has an asymmetrical notch", so the

DDR memory module can only fit into the slot in one

direction.

2. Push the tabs out. Insert the DDR memory modules

into the socket at a 90-degree angle then push down

vertically to fit onto place.

3. The Mounting Holes and plastic tabs should fit over the

edge and hold the DDR memory modules in place.

Bank

DDR 1

( Bank 0-1 )

DDR 2

( Bank 2-3 )

Note:

When you plug or unplug DDR module, you must

check your power supply is off.

Memory module

64MB, 128MB, 256MB, 512MB, 1GB

184 pin, 2.5V DDR SDRAM

64MB, 128MB, 256MB, 512MB, 1GB

184 pin , 2.5V DDR SDRAM

Total System Memory (Max 2GB)

80 pins

1 - 8

Mnshdranarc Cdrbrhoshnn

104 pins

Table of Contents