Init Display First - Acorp 4PM266M User Manual

Table of Contents

Bhapter 1

0Midi Port IRQ

10 (default)

Init Display First

PCI Slot (default)

AGP

Onchip USB Connector

This should be enabled if your system has a USB installed

on the system board and you wish to use it. Even when so

equipped, if you add a higher performance controller, you

will need to disable this feature.

The Choices: All Enabled(default), All Disabled, 1&2

USB Port, 2&3 USB Port, 1&3 USB Port, 1 USB Port, 2

USB Port, 3 USB Port.

USB Keyboard Support

Select Enabled if your system contains a Universal Serial

Bus(USB) controller and you have a USB keyboard.

The Choices: Disabled(default), Enabled.

USB Mouse Support

Select Enabled if your system contains a Universal Serial

Bus(USB) controller and you have a USB mouse.

The Choices: Disabled(default), Enabled.

IDE HDD Block Mode

Enabled (default)

Disabled

Set Midi Port IRQ to 10.

Set Midi Port IRQ to 5.

Set Init Display First to PCI

Slot.

Set Init Display First to

onboard AGP.

Enabled.

Disabled.

1 - 1 4

BIOS Settp

Table of Contents