Acorp 4PM266M User Manual page 112

Bhapter 1 Bhapter 1
Bhapter 1 Bhapter 1 Bhapter 1
DRAM Command Rate
The Choices: 2T Command(default), 1T Command.
CPU Read DRAM Mode
The Choices: Medium(default), Slow, Fast.
CMOS Setup Utility-Copyright (C) 1984-2001 Award Software
AGP Aperture Size
AGP Mode
AGP Driving Control
AGP Driving Value
AGP Fast Write
AGP Master 1WS Write
AGP Master 1WS Read
←→↑↓: Move
F1:General Help
F7:Optimized Defaults
AGP Aperture Size
Select the size of the Accelerated Graphic Port(AGP)
aperture. The aperture is a portion of the PCI memory
address range dedicated for graphics memory address
space. Host cycle that hit the aperture range are forwarded
to the AGP without any translation.
The Choices: 64M(default), 32M, 16M, 8M, 4M, 128M.
AGP Mode
The Choices: 4X(default), 2X, 1X.
AGP Driving Control
By choosing "Auto" the system BIOS will enable the AGP
output Buffer Drive strength that were defined by AGP
Card. By choosing "Manual", it allows user to set AGP
output Buffer Drive strength by manual.
The Choices: Auto(default), Manual.
AGP Fast Write
The Choices: Disabled(default), Enabled.
AGP & P2P Bridge Control
64M
4X
Auto
DA
Disabled
Disabled
Disabled
Enter:Select +/-/PU/PD:Value
F5:Previous Values
1 - 1 6 1 - 1 6 1 - 1 6
1 - 1 6 1 - 1 6
Item Help
Menu Level
F10:Save ESC:Exit
F6:Fail-Safe Defaults
BIOS Settp BIOS Settp
BIOS Settp BIOS Settp BIOS Settp