Introduction; Equipment; Control Panel - ESAB Caddy Arc 251i Instruction Manual

GB
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and returned to an
environmentally compatible recycling facility. As the owner of the equipment, you should
get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human
health!
ESAB can provide you with all necessary welding protection and accessories.
3

INTRODUCTION

Arc 25li is a welding current power source intended for use with coated electrodes
(MMA welding) and TIG welding.
ESAB's accessories for the product can be found on page 25.
3.1

Equipment

The power source is supplied with:
Instruction manual for the welding power source
S
Instruction manual for the control panel
S
3 m return cable
S
3 m welding cable
S
Instruction manuals in other languages can be downloaded from the website,
www.esab.com.
3.2 Control panel A32, A34
Welding process parameters are controlled via the control panel.
See the separate instruction manual for a detailed description of the control panels.
bh34d1ea
- - 16 - -