Toshiba 2460 Service Handbook page 62

1.16.2 Adjusting ADU side deviation
To adjust the side deviation of the image of duplexed copies (i.e. the image on the second side):
(1) When the 5 fixing screws at the front cover of the ADU are loosened, the ADU can be adjusted in the
front/rear direction by a maximum of 3 mm.
(2) If the center of the image is shifted toward the rear side, move the ADU front cover to the rear side
the same distance (as the image is shifted) and tighten the screw.
(3) If the center of the image is shifted toward the front side, move the ADU front cover to the front side
the same distance (as the image is shifted) and tighten the screw.
Front left side
Right feed side
1.17 Adjusting Cassette Side Deviation
The procedure for adjusting cassette side deviation for the copier and the PFP is the same as in 1.16.2.
September 1997 © TOSHIBA CORP.
Front right side
1 - 59 2460 ADJUSTMENT