Toshiba 2460 Service Handbook page 13

1.2.3 Test Print (Test Mode "04")
In test mode "04," you can print the test pattern generated by the following ASIC codes.
Code ASIC
111 SARAH
113 SARAH
142 HPS
183 SARAH
184 SARAH
<Operation procedure>
0 4
Code
PWR
Note: Though errors are displayed when generated, recovery is not carried out. This is remedied by turning the
power OFF then ON again.
2460 ADJUSTMENT
Primary scanning, 33 gradation (2nd step), error diffusion
Secondary scanning, 33 gradation (2nd step), error diffusion
2-dot grid pattern (Pitch 10 mm)
Primary scanning, 33 gradation (2nd step), + dither process, for fax
Secondary scanning, 33 gradation (2nd step), + dither process, for fax
Operation
START
(Test print)
Test Pattern type
0
C/S
1 - 10 September 1997 © TOSHIBA CORP.
9
Warming up