h) Top margin
Not functional
i) Bottom margin
(1) While the original cover remains open, make an A4 100% copy.
(2) In order that the blank space at the trailing edge of the copy is just 2 mm, adjust as in the
following procedure.
0
5
4
PWR
Notes 1. An increase in the value corresponds to an increase in the blank image (0.0423
mm/step).
2. In order to make a test copy, make sure the message indicates [100 %
after the INT key is pressed.
3. Adjustment value is able to be input within the range of –94 ~ 255.
The default adjustment value is 0.
4. In order to input a minus (–) value, use the # key.
(ex. if the value is "–15": key in # 1 5 )
September 1997 © TOSHIBA CORP.
Copy movement direction
2mm
3
3
START
1 - 37
Set the value
INT
E/S
(Test copy)
A]
2460 ADJUSTMENT