Toshiba 2460 Service Handbook page 25

In this status, check if the numerical value in B is within the range of 235 ~ 245 (auto-toner sensor
(6)
output range of 2.35 V ~ 2.45 V).
If the numerical value in B is not within the range of 235 ~ 245, use the ZOOM keys to adjust the
(7)
numerical values manually to within the range of 235 ~ 245.
The relationship between the ZOOM keys and the numerical values in A and B is as shown below.
Note:
ZOOM up key
ZOOM down key
(8) Press the INTERRUPT key.
The drum, developer unit, etc., will stop operating and the following display will appear.
100%
TEST MODE
INT
(9) Turn off the power switch.
Install the toner cartridge.
2460 ADJUSTMENT
Key used
Increase
Decrease
A3
A
A value B value
Increase
Decrease
100%
0 9 READY
1 - 22 September 1997 © TOSHIBA CORP.
A4
1