Main Wash Water; Rinse Water; Low Water Pressure; Mops Pre-Spin - Miele PW 6080 Vario LP Commissioning Instructions

Main wash water

You can select hot or cold water for
the main wash. Hot water can only be
only taken in if the wash temperature
is above 30°C.
This setting is confirmed when the
machine is commissioned.
If the machine is not connected to
the hot water supply, the programme
durations will be longer and will vary
from the time remaining shown in the
display.

Rinse water

You can select hot or cold water for
the main wash. Hot water can only be
only taken in if the wash temperature
is above 50°C.
The machine is delivered with the Cold
water option selected.
Settings/Supervisor level menu

Low water pressure

This setting can be activated to
ensure problem free water intake
where the water pressure is
constantly low (below 100 kPa).
The machine is delivered with the No
option activated.

MOPS pre-spin

This option is visible in the display
but not available on this machine!

MOPS final spin

This option is visible in the display
but not available on this machine!
41