Intermec PF2i User Manual page 51

PF2i and PF4i Mid-Range Printer User's Manual
To perform a testprint
1 Press T to enter the Setup menu, and use the keypad to go to the
TESTPRINT menu:
If you are running Fingerprint, go to SETUP > PRINT DEFS >
•
TESTPRINT.
If you are running IPL, go to SETUP > TEST/SERVICE >
•
TESTPRINT > CONFIG.
2 Select a testprint to perform. For more information, see the next
tables.
Fingerprint Testprint Options
Testprint Description
Diamonds Prints a diamond pattern.
Chess Prints a chess board pattern.
Bar Codes #1 Prints a horizontal set of bar codes.
Bar Codes #2 Prints a vertical set of bar codes.
Setup Info Contains current configuration parameters stored in the
printer's memory, defined pages, defined formats, defined
graphics, defined fonts, and any installed printer options.
Hardware Info Contains printer memory information; printer mileage;
printhead settings; firmware checksum, program, and
version number.
RFID Test Label Prints an RFID test label that includes the tag type name.
Network Info Contains WINS name, MAC address, IP selection, IP
address, netmask, default router, name server, mail server,
primary WINS server, secondary WINS server, and
network statistics.
IPL Testprint Options
Testprint
Config
SW
Description
Contains current configuration parameters stored
in the printer's memory, defined pages, defined
formats, defined graphics, defined fonts, and any
installed printer options.
Chapter 1 — Using the Printer
37