Accessories For The Printer - Intermec PF2i User Manual

Accessories for the Printer

PF2i and PF4i Mid-Range Printer User's Manual
You can use these accessories (sold and ordered separately) with the
printer. To order accessories, contact your local Intermec sales
representative.
Integral Liner Takeup Unit
Use this accessory, which comes with a guide shaft, for peel-off (self-
strip) printing.
Paper Cutter (PF4i, Only)
Use this accessory to cut off continuous paper-based stock or liner
between labels. You can collect the cut-off labels, tickets, or tags in an
optional tray.
If you are running Fingerprint or Direct Protocol, you can control the
paper cutter using the commands CUT, CUT ON, and CUT OFF. For
help, see the Intermec Fingerprint Command Reference
Media Supply Hub
Use the rotating media supply hub for media roll cores with an
internal diameter of 38 to 40 mm (1.5 in).
Transfer Ribbon Mechanism (PF2i, Only)
Use the transfer ribbon mechanism to load ribbon for thermal
transfer printing. For help, see
76 mm (3-in) Adapter
Use the 76 mm (3-in) adapter with a rotating media supply hub to use
media rolls with 76 mm (3-in) inner diameter cores. The adapter
cannot be used with a media supply roll post.
Label Taken Sensor
The label taken sensor (LTS) is a photoelectric sensor that enables the
printer's firmware to detect if the last printed label, ticket, tag, etc. has
been removed before printing another copy. The LTS cannot be used
with a paper cutter.
If you are running Fingerprint or Direct Protocol, you can enable or
disable the LTS using the commands LTS& ON and LTS& OFF. For
help, see the Intermec Fingerprint Command Reference
Appendix A — Specifications
"Loading Ribbon" on page
Manual.
30.
Manual.
145