Intermec PF2i User Manual page 148

Appendix A — Specifications
134
Self-Adhesive Strip
PF2i Media Width Including Liner (a)
Measurement
Maximum
Minimum, standard guides
Minimum, quick-load guides
PF4i Media Width Including Liner (a)
Measurement
Maximum
Minimum, standard guides
Minimum, quick-load guides
Minimum, wide quick-load guides
Liner (b)
The liner must not extend more than a total of 1.6 mm (0.06 in)
outside the face material and should protrude equally on both sides.
PF2i Media Width Excluding Liner (c)
Measurement Value
Maximum 58.4 mm (2.30 in)
Minimum 23.8 mm (0.94 in)
PF4i Media Width Excluding Liner (c)
Measurement Value
Maximum 112.7 mm (4.43 in)
Minimum 23.8 mm (0.94 in)
Value
60 mm (2.36 in)
25.0 mm (1.00 in)
40 mm (1.57 in)
Value
114.3 mm (4.50 in)
25.0 mm (1.00 in)
40 mm (1.57 in)
80.0 mm (3.15 in)
PF2i and PF4i Mid-Range Printer User's Manual