Adjusting The Printer - Intermec PF2i User Manual

Adjusting the Printer

PF2i and PF4i Mid-Range Printer User's Manual
Chapter 4 — Troubleshooting and Maintaining the Printer
Resetting the printer also does not change the selected printer
language (Fingerprint, IPL, ZSim, or DSim).
There are two ways to reset the printer:
• Insert a special CompactFlash memory card and restart the
printer.
Use the printer's keypad.
•
To reset the printer using the keypad
1 Turn off the printer.
2 Open the right cover and lift the printhead.
3 Turn on the printer and press and hold the I key until the
printer beeps.
4 Quickly press the following keys in sequence:
D U U L
The following message appears:
Factory Default?
Enter=Yes ESC=No
5 Within 10 seconds, press E to reset the printer to its factory
default settings. The parameters are reset and the printer
continues the normal startup process.
If you do not press E within 10 seconds, the normal startup
continues and the printer is not reset.
You may need to adjust your printer to accommodate your printing
needs or improve performance. You can adjust the:
• pressure arm.
• label stop sensor (LSS) position.
• printhead pressure.
• ribbon break shaft.
105