Operation; Controls; Display Unit - Furuno FR-7041R-MARK-2 Operator's Manual

1.

OPERATION

1.1

Controls

1.1.1

Display unit

Turns power on.
Press together with
[STBY/TX] key to turn power off.
Toggles between standby and
transmit.
Executes function programmed.
Selects radar range.
Adjusts display brilliance.
Touch-and-release: Shift
Long press: Zoom
Displays target movement in
afterglow.
Switches unit of measurement
for VRM and cursor.
Turns respective EBL on/off.
Registers selection on menus.
GAIN
POWER
OFF
HM OFF(PUSH)
Control:Suppresses sea clutter.
A/C SEA
STBY
Switch: Stretches echoes in bearing
T X
ECONOMY
ES (PUSH)
A/C RAIN
F1
Control:Manually suppresses rain clutter.
FTC (PUSH)
Switch: Automatic rain clutter
F2
RANGE
BRILL MODE
SHIFT
GUARD
ZOOM ALARM
ECHO EBL
TRAIL OFFSET
NM/KM TLL
Outputs cursor position to
navigation device.
EBL 1
VRM 1
EBL 2
VRM 2
ENTER MENU
1) Shifts cursor, EBL and VRM.
2) Sets guard zone.
3) Selects items and options
Figure 1-1 Control panel
Control: Adjusts sensitivity of
radar receiver.
Switch: Temporarily erases
heading marker.
direction (ES1) and bearing
and range directions (ES2).
suppression.
Selects presentation mode.
Sets/cancels guard alarm;
silences aural alarm.
Measures range and bearing
between two targets; predicts
collision course.
Turns respective VRM on/off.
Opens/closes menu.
Trackball
from menus.
1-1