Maintenance, Troubleshooting - Furuno FR-7041R-MARK-2 Operator's Manual

3. MAINTENANCE,
TROUBLESHOOTING
This chapter tells you how to keep your radar in good working order. Before
reviewing this chapter please read the safety information which follows.
WARNING
Do not open the equipment.
Hazardous voltage which can
cause electrical shock exists
inside the equipment. Only
qualified personnel should
work inside the equipment.
Turn off the radar power
switch before servicing the
antenna unit. Post a warn-
ing sign near the switch
indicating it should not be
turned on while the antenna
unit is being serviced.
Prevent the potential risk of
being struck by the rotating
antenna and exposure to
RF radiation hazard.
Wear a safety belt and hard
hat when working on the
antenna unit.
Serious injury or death can
result if someone falls from
the radar antenna mast.
3-1