Shifting The Picture - Furuno FR-7041R-MARK-2 Operator's Manual

1.21

Shifting the Picture

Your vessel's position can be shifted to view ahead or behind your vessel without
changing the range.
1. Operate the trackball to set cursor anywhere within the effective radius.
2. Press the [SHIFT/ZOOM] key with a touch-and-release action. OFFCENTER
appears at the top right corner of the display when the picture is shifted.
Canceling shifted picture
Press the [OFF CENTER] key again to erase the indication "OFFCENTER."
Note: The offcenter control on the remote controller shifts the sweep center 30%
of the effective radius in the stern direction.
Effective radius
Place cursor Press [SHIFT/ZOOM] key
where desired. with a touch-and-release
action.
Figure 1-19 Shifting the picture
1. OPERATION
OFFCENTER
Cursor
1-21