Transport And Storage; Installation - Douwe Egberts Cafitesse Excellence Operator's Manual

Transport and storage

Always store and transport the dispenser in the original packaging.
Before storing or transporting the dispenser:
• Place the product packs in the refrigerator.
• Clean the dispenser.
• Contact your Cafitesse system supplier so that an authorized and
trained service technician can drain the water from the boiler and
protect the dispenser against frost damage.
Caution:
The dispenser may not be subject to frost during operation,
storage or transport.

Installation

Installation, relocation, service and programming of the dispenser is
restricted to authorized and trained service technicians.
The equipment must be installed by your Cafitesse system supplier
in compliance with the installation requirements:
The dispenser is designed for indoor installation only, place on a
stable flat surface such as a table or a counter capable of supporting
its weight. Shield the dispenser from direct sunlight, frost and rain.
Make sure that there is sufficient space around the dispenser for
ventilation, and front/back sides are accessible for service.
Only use new water hoses and connections in compliance with
EN61770 for connection to the water supply, old and/or used water
hoses are not allowed.
6
The dispenser must be connected to the drinking water line in
compliance with local regulations. In case of cold drink options, the
quality of the water supply must be checked to ensure delivery of
safe cold drinks according to local regulations.
Shield the dispenser from running water, splashes, spray
or steam, heat or heavy dust.
The dispenser may not be cleaned using a water jet and is not
suitable for installation on a surface where a water jet may be used
in the vicinity (e.g. for cleaning purposes).
If the dispenser is connected with a permanently wired power
supply (without mains plug), ensure the electric circuit is equipped
with a circuit breaker with a contact opening of at least 3 mm / 0.12
in that controls all poles.
If connected to a wall outlet power supply, use a grounded safety
plug socket in compliance with local regulations. Ensure that the
electric circuit is secured by means of a fault current safety switch
and that the power supply plug remains accessible after installation.