Operating; Placing A Product Pack; Empty Product Packs; Cup/Pot Placement - Douwe Egberts Cafitesse Excellence Operator's Manual

Fig. 4.1 - Place product pack

Placing a product pack

Caution:
Never use a frozen or damaged
product pack. Do not use a product
pack if the "Best before" date has
expired.
1. Wash your hands before touching a
product pack.
2. Read and follow the instructions on the
rear of the pack.
3. Open the dispenser door.
4. Insert the product pack (fig. 4.1).
5. Close the dispenser door.
6. Dispense a test drink.
Fig. 4.2 - Empty product pack icon

Empty product packs

If a product pack is empty, the
corresponding drink selection labels will
not light up and the drinks cannot be
delivered. The icon for empty product pack
will be shown on the display (fig. 4.2).
The delivery of hot or cold water is still
possible.
If an operator telephone number is
set and enabled in the operator menu
TELEPHONE # , the entered telephone
number will be shown on the display:
0123456789
* = drink selections depend on dispenser version and settings

4 - OPERATING

Fig. 4.3 - Cup placement

Cup/pot placement

The dispenser has three product outlets:
• Left: for milk, cocoa, tea or coffee drinks*
• Middle: for coffee or tea*
• Right: for water
Caution:
Place your cup or pot under the
outlet below the drink button of your
selection.
Place your cup on the cup tray or drip tray
(fig. 4.3).
A special dispenser foot is required when
using pots.
11