Setting The Eco Start And End Time; Setting The Eco Boiler Temperature; Telephone - Douwe Egberts Cafitesse Excellence Operator's Manual

Setting the ECO start and end time

Note:
ECO mode needs to be enabled for
the next submenus to show.
to select the ECO START or
1. Use or
ECO END submenu.
The current ECO time is shown on the
display.
2. Press to enter the submenu.
The option hour setting flashes and is
active.
3. Use or to set the correct time
(hours).
4. Confirm with .
The option minutes setting flashes and is
active.
5. Use or to set the correct time
(minutes).
6. Confirm with .
The new ECO time is shown on the display.

Setting the ECO boiler temperature

Note:
ECO mode needs to be enabled for
the next submenu to show.
to select the ECO
1. Use or
TEMPERATURE submenu.
The current ECO boiler temperature is
shown on the display.
2. Press to enter the submenu.
The temperature setting is flashing.
3. Use or to select the desired
temperature.
4. Confirm with .
The new ECO boiler temperature is shown
on the display.
Note:
The lower the ECO boiler temperature
is set, the longer it takes for the
dispenser to become fully functional
again after coming out of ECO mode.

TELEPHONE #

You can set the telephone numbers of
operator and service in this menu.
You can also select whether the numbers
should be displayed in case:
• cleaning is required (operator)
• a product pack is empty (operator)
• a malfunction is detected (service)
Select the TELEPHONE # menu by using
or and press to access it.
The status is shown in the display:
OPERATOR NR: 0123456789
There are four submenus:
• SHOW OPERATOR NR
• SHOW SERVICE NR
• OPERATOR NR
• SERVICE NR
27