Developer Refreshing; Lsu Dust Shield Glass And Main Charger Cleaning - Kyocera FS-C5350DN Service Manual

Service items
>>DEV-CLN
>>LSU/Charger

Developer refreshing

Description
The laser output of the image data for developer refreshing is carried out, and operation to
exposure, developing, and primary transfer is performed by 10 pages. (Paper is not fed)
Purpose
To perform cleaning when faulty images occur and a line appears longitudinally.
Procedure
1. Enter the service mode [>>DEV-CLN].
2. Press the OK key. [>>DEV-CLN?] will be displayed.
3. Press the OK key. Developer refreshing will be started.
Completion
Figure 1-3-4Developer refreshing Image data

LSU dust shield glass and main charger cleaning

Description
The LSU cleaning motor drives the cleaning pad which in turn wipes clean the LSU dust
shield glass.
The main charger cleaning motor drives the cleaning pad which in turn wipes clean the main
charger wire and the main charger grid.
Purpose
To perform cleaning when the printed image is bad and stripes are seen in the vertical direc-
tion.
Procedure
1. Enter the service mode [>>LSU/Charger].
2. Press the OK key. [>>LSU/Charger?] will be displayed.
3. Press the OK key. LSU dust shield glass and main charger cleaning will be started.
Completion
Description
A4 paper size
200 mm
Toner image on the transfer belt
33 mm
1-3-11
2K8