1-5-7
Fuser section
(1) Detaching and refitting the fuser unit
Procedure
1. Remove the outer covers (See page 1-5-3).
2. Remove three connectors.
3. Remove two screws (P tight and S tight).
4. Unhook the hook and then remove the fuser
unit.
5. Check or replace the fuser unit and refit all
the removed parts.
Connector
Connector
Boss
Connector
Figure 1-5-33
Fuser unit
Screw (S tight)
Hook
Fuser unit
Figure 1-5-34
2K8
Screw
(P tight)
1-5-25