Dev-Set; Entering Initial Value (6-Digit Data) For Replacing The Developing Unit - Kyocera FS-C5350DN Service Manual

2K8
Service items
>>DEV-SET
1-3-10

Entering initial value (6-digit data) for replacing the developing unit

Description
After replacing the developing unit, enter the initial value (6-digit data) assigned on a label
attached to the package or developing unit.
Procedure
1. Enter the service mode [>>DEV-SET].
2. Press the OK key.
[>>DEV-SET 000000] will be displayed.
3. Enter the initial value (6-digit data) with cursor keys.
6-digit data is assigned on a label attached to the package or developing unit.
Developing unit
Arrow keys
4. Press the OK key.
[>>OK? 128F1E] will be displayed.
5. Press the OK key.
[DEV-SET] will be displayed. The initial value (6-digit data) is set.
Completion
Description
128F1E
DV560Y
Message display
>>DEV-SET
000000
Example
6-digit data: 128F1E
128F1E
DV560Y
Notes
0: 21/23 ppm (250-sheet) model
21/23 ppm (250-sheet) model
1:
26/28 ppm (500-sheet) model
30/32 ppm (500-sheet) model*
*This machine
Label
Package
Label
0: Magenta
1: Cyan
2: Yellow
3: Black