Installing The Hard Disk (Option) - Kyocera FS-C5350DN Service Manual

1-2-5

Installing the hard disk (option)

<Procedure>
1. Turn off printer power switch.
Caution: Do not insert or remove hard disk
unit while printer power is on.
Doing so may cause damage to the printer
and the hard disk.
2. Remove two screws and then remove the
option interface slot cover.
3. Insert the hard disk into the option interface
slot. Push it in all the way.
4. Secure the hard disk by using two screws.
Option
interface
slot
Hard disk
Figure 1-2-9
2K8
Option interface
slot cover
Screw
Screw
1-2-7