The Leading Edge Of Image Begins To Print Too Early Or Too Late; Paper Is Wrinkled; Offset Occurs; Part Of Image Is Missing - Kyocera FS-C5350DN Service Manual

2K8

(11) The leading edge of image begins to print too early or too late.

Print example
Paper feed clutch or registration
clutch operating incorrectly.

(12) Paper is wrinkled.

Print example
Paper curled.
Paper damp.

(13) Offset occurs.

Print example
Deformed or worn cleaning blade in
the drum unit.
Defective intermediate transfer belt
cleaning.
Defective fuser unit.
Wrong types of paper.

(14) Part of image is missing.

Print example
Paper damp.
Paper creased.
Drum condensation.
Dirty or flawed drum.
Dirty transfer belt.
Dirty transfer roller.
1-4-26
Causes
Causes
Causes
Causes
Check procedures/corrective measures
Check the installation of the clutch. If it operates incorrectly,
replace it.
Check procedures/corrective measures
Check the paper storage conditions, replace the paper.
Check the paper storage conditions, replace the paper.
Check procedures/corrective measures
Replace the drum unit.
Replace the intermediate transfer unit (See page 1-5-16).
Replace the fuser unit (See page 1-5-25).
Check if the paper meets specifications. Replace paper.
Check procedures/corrective measures
Check the paper storage conditions, replace the paper.
Replace the paper.
Perform the drum surface refreshing (See page 1-3-12).
Perform the drum surface refreshing (See page 1-3-12).
Flawed drum. Replace the drum unit (See page 1-5-14).
Clean the transfer belt.
Replace the intermediate transfer unit (See page 1-5-16).
Clean the transfer roller.
Replace the transfer roller unit (See page 1-5-19).