Installing The Hard Disk (Option For 26/28 Ppm [500-Sheet] Model Only) - Kyocera FS-C5300DN Service Manual

1-2-5

Installing the hard disk (option for 26/28 ppm [500-sheet] model only)

<Procedure>
1. Turn off printer power switch.
Caution: Do not insert or remove hard disk
unit while printer power is on.
Doing so may cause damage to the printer
and the hard disk.
2. Remove two screws and then remove the
option interface slot cover.
3. Insert the hard disk into the option interface
slot. Push it in all the way.
4. Secure the hard disk by using two screws.
Option
interface
slot
Hard disk
Figure 1-2-9
2HL/2HM/2HN
Option interface
slot cover
Screw
Screw
1-2-7