Pptp - D-Link DIR-878 User Manual

Section 3 - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol) if your Internet Service Provider (ISP) uses a PPTP connection. Your Internet service provider (ISP)
can provide you with a username and password.
PPTP Server IP Enter the PPTP Server IP Address provided by your ISP.
Address:
Username: Enter the Username provided by your ISP.
Password: Enter the Password provided by your ISP.
Reconnect Select either Always on, On demand, or Manual.
Mode:
Maximum Idle Enter a maximum idle time during which the Internet connection
Time:
is maintained during inactivity. To disable this feature, enable Auto-
reconnect.
Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic IP.
PPTP IP Enter the PPTP IP Address provided by your ISP (for Static IP only).
Address:
Enter the PPTP Subnet Mask provided by your ISP (for Static IP only).
PPTP Subnet
Mask:
PPTP Gateway Enter the PPTP Gateway IP Address provided by your ISP (for Static
IP Address: IP only).
Enter the Primary DNS Server IP address assigned by your ISP.
Primary DNS
Server:
Secondary DNS Enter the Secondary DNS Server IP address assigned by your ISP.
Server:
D-Link DIR-878 User Manual

PPTP

29