Table of Contents
Advertisement
Recording Images
This digital video recorder can record images being monitored and alarm on the internal hard disk by the
methods specified below.
In order to record images, the necessary menu settings should be made beforehand in accordance with
the installation environment. (See p. 7)
I I I I Normal recording
This is a manual operation for recording live images that are currently being
viewed into the normal recording area.
1
Click the O
O
O button on the operating panel to start normal recording.
O
2
Click the P
P
P button on the operating panel to stop normal recording.
P
If more than one camera is connected to the digital video recorder for
monitoring, the images for all cameras that have been set in the REC CAMERA
GROUP specified by the NORMAL REC MODE SET setting will be recorded,
regardless of the number of live image display screens. (See p. 13)
I I I I Timer recording
This is for automatically recording an image that is being viewed into the normal recording area at a specified time.
Timer recording is not possible during normal recording.
1
The conditions for timer recording (day of the week, time, recording speed, etc.) are set beforehand using the
TIMER SET menu screen. (See p. 14)
2
Timer recording is started by clicking the Q
automatically in accordance with the specified times. The timer recording operation is indicated by a " TIMER
STANDBY" or " TIMER RECORDING" message appearing on the screen.
If " OLY AL-RC ON TMR" has been selected as the ALARM RECORDING setting (see p. 16), timer recording standby
operation using the Q button is not possible.
3
To cancel timer recording, click the Q
mode.
I I I I Alarm recording
Alarm images are recorded automatically in the alarm recording area when the alarm input terminals or motion
sensor have detected an alarm.
When alarm recording is in operation, normal recording, timer recording and pre-alarm recording are automatically
suspended, and they are resumed when the alarm recording is finished.
1
The conditions for alarm recording are set beforehand using ALARM REC MODE SET menu screen. (See p. 15)
2
Alarm recording begins automatically when an alarm is detected, regardless of the operating or working
conditions of the digital video recorder.
3
Alarm recording stops automatically after the amount of time specified by the DURATION setting has elapsed.
I I I I Pre-alarm recording
When pre-alarm recording has been set beforehand, the same images will be recorded normally in the normal
recording area and also in the alarm recording area. The normal recording images will be recorded in this way for the
length of time specified by the DURATION setting, so that the images recorded before the alarm occurred can also be
seen when the alarm recording is played back.
1
Set the pre-alarm recording conditions using the [PRE-ALARM RECORDING] menu in the ALARM REC MODE
SET menu screen. (See p. 17)
2
The most recent images will be recorded automatically for the specified duration, and they will be updated by
being overwritten.
3
When an alarm recording is being carried out, pre-alarm recording is automatically suspended, and it is resumed
when the alarm recording is finished.
Q button on the operating panel and recording will start and stop
Q
Q
Q button on the operating panel again when in timer recording standby
Q
Q
22
English
Advertisement
Table of Contents
