Table of Contents
Advertisement
. ' # ) A 9 # 8 # 5 9 ) $ D Q Q M T V R ' ' ' ' ' ' ' '
MP2 Viewer
The MP2 Viewer is a special playback software application that is used for the DSR-M800/M804/M810/
M814 series. It can be used to play back image data in MPEG2 format that has been saved from the
DVR onto a recording medium such as and computer's hard disk drive, a CompactFlash card or a
CD-R.
Main Functions
1. Plays back saved images data (sound cannot
be played back).
2. Saves still playback images as JPEG files.
3. Prints still playback images.
4. Detects image tampering.
Minimum
CPU
Pentium III, 800MHz
Memory
128MB
Display
XGA (1024 × 768 pixel), 16-million color or greater
AGP graphics card for hardware overlay
Or motherboard with onboard graphics chip*1
OS
Windows 2000 Professional
*1 Latest driver with 100% DirectX 9.0b compatibility is required.
Installation/Saving Location
When the DVR utility software is installed, the
MP2 Viewer program is installed at the same
time.
Starting
When image data is downloaded from a DVR,
MP2 Viewer is also saved automatically from the
computer into the download destination folder. If
you double-click MP2 Viewer, the program will
start and you can then load the desired image
files that are saved in the folder, so that the
images can be played back regardless of where
the storage medium is taken to and used.
The MP2 Viewer should only be used by
itself. If you use it at the same time as
you are using other MPEG playback
software, it may not operate correctly.
' ' '
Operating Environment
The following operating environment is required
in order to use MP2 Viewer.
Recommended
Pentium 4, 1.7GHz
256MB
Windows XP Professional
90
English
Advertisement
Table of Contents
