Table of Contents
Advertisement
. ' # ) A 9 # 8 # 5 9 ) $ D Q Q M T V R ' ' ' ' ' ' ' '
SEARCHING
Normal recording images, timer recording images and alarm recording images that have been recorded
by a DVR can be searched through using the computer and played back. The following three search
modes are available.
Time/date search: (P.70)
This lets you search all images on the DVR's hard disk(s) randomly by specifying a recording date.
Alarm search: (P.71)
This lets you search for alarm recordings from an alarm list.
Alarm thumbnail search: (P.73)
This lets you search for alarm recording images by means of thumbnails (compressed images).
Time/Date Search
This lets you search for images that have been
recorded on the DVR's hard disk by the date and
time that they were recorded.
1
Display the window for the DVR to be
searched.
The window can be either in the quad
screen or the multi screen. If using the multi
screen, click the title bar to specify the DVR
to be searched.
2
Click the top [SEARCH] spin buttons (1
to select the date (day/month/year) to
start searching from.
3
Click the bottom [SEARCH] spin buttons
2 ) to select the time (hour/minutes/
2 2
(2
seconds) to start searching from.
4
3 ).
Click
(3
3 3
The images will be played back from the
specified date and time.
You can carry out operations such as still
and cue of the playback images using the
playback control panel. (P.69)
•
If no images are found for the
specified date and time, the images
that are immediately after that date
and time are displayed.
•
The date display order will vary
depending on the Windows time
display settings. The display order
that has been set with Windows will
be displayed as text at the top and
bottom of the spin buttons.
(User Level: ID2 or higher)
1 )
1 1
Example: To specify 18:31:18 on July 7, 2004
70
' ' '
1
2
3
English
Advertisement
Table of Contents
