Table of Contents
Advertisement
. ' # ) A 9 # 8 # 5 9 ) $ D Q Q M T V R ' ' ' ' ' ' ' '
FUNCTIONS OF EACH MAIN WINDOW (MONITORING, RECORDING AND
PLAYBACK WINDOW) COMPONENT
SEQUENCE (P.57)
If the DVR is a DSR-M804/M814 (4-channel
type), all images from the specified camera
are displayed in sequence with automatic
switching.
MULTI (P.54)
Images from a maximum of four DVRs are
allocated to windows in a 4-screen split
screen, so that images from all connected
cameras are displayed in a single multi
screen. If all of the DVRs are DSR-M804/
M814 models (4-channel type), 16 screens
are displayed.
ALARM SEARCH (P.71)
This displays the "ALARM SEARCH" or
"ALARM THUMBNAIL SEARCH" window.
This window is used to search for alarm
recordings.
BROADCAST (P.52)
This displays the "BROADCAST" window.
This window is used for issuing batches of
basic commands such as commands to start
or stop recording to the DVRs that are
connected to the system.
TIMER DOWNLOAD (P.81)
This displays the "TIMER DOWNLOAD"
window.
Timer reservations can be made for
downloading recorded images.
TAMPER DETECTION (P.89)
This displays the "TAMPER DETECTION"
window.
This window lets you determine if any
tampering has been carried out on recorded
images.
' ' '
SETUP (P.16, 20)
This displays the "SETUP" window.
This window is used to make initial
program settings after the software has
been installed.
2
EXIT
Click to exit the software and close the
program window.
3
Date and time display
This shows the date and time set by the
computer's internal clock.
The timer download status is displayed
underneath the date and time. (P.84)
4
Message display window
Results for details such as error and alarm
status and setting operations are displayed in
sequential messages.
<DVR registration name, date and time of
occurrence, details of occurrence>
Display example:
DVR-3 11-05-04 15:45:40 LIVE ERROR
BROADCAST 11-05-04 15:50:20 DONE
•
The only error messages that are
displayed are system errors such as
communication errors.
•
When the software is exited, the
information is discarded from the
display, but it can still be found in the
log file that is saved in the log file
sub-folder of the folder that the software
has been installed into.
(C:\ProgramFiles\SANYO\VA-SW814\log)
14
English
Advertisement
Table of Contents
