Display/Buzzer Set Tab - Sanyo VA-SW814 Instruction Manual

.  ' # ) A 9 # 8 # 5 9    ) $  D Q Q M   T V R ' ' ' ' ' '  ' '   
MENU SETTINGS (MENU WINDOW)

DISPLAY/BUZZER SET tab

This is used to set the display information and buzzer operation for the monitor connected to the DVR.
Specify the DVR to be set in the DVR list in the "TARGET" window, and then click
double-click the DVR name, and then follow the instructions that appear in the dialog box message to
select the setting. The data will be loaded from the DVR and the window will become active.
1
2
1
DISPLAY
Select "ON" to set the monitor screens to display the following information, or select "OFF" if you do
not need the information to be displayed, click [APPLY] and then click [OK].
DATE/TIME (Default setting: ON)
•
For live images: Current date and time
•
For playback images: Recording date and time
QUALITY/AUDIO (Default setting: ON)
Image quality and audio recording settings
If "AUDIO RECORDING" is set to "ON", an "A" symbol is displayed in the monitor screen.
ALARM COUNT (Default setting: ON)
Cumulative number of alarms
The maximum number of alarms that can be recorded is 99,999. When the maximum number of
alarms is exceeded, the counting starts again from "0".
CAMERA TITLE/DVR NAME
This shows the camera titles or DVR names depending on the type of DVR that is connected.
•
DSR-M804/M814: CAMERA TITLE (Default setting: ON)
•
DSR-M800/M810: DVR NAME (Default setting: OFF)
English
' ' '
47
(User Level: ID4)
, or