Broadcast Transmission Settings (Broadcast Window) - Sanyo VA-SW814 Instruction Manual

.  ' # ) A 9 # 8 # 5 9    ) $  D Q Q M   T V R ' ' ' ' ' '  ' '   
BROADCAST TRANSMISSION SETTINGS
(BROADCAST WINDOW)
Basic commands can be transmitted from a single user terminal to all connected DVRs in a single
operation. This is called "broadcasting". Click
window.
The operation permissions for this window vary depending on the command being used.
1
2
3
4
5
1
RECORD
(User Level: ID3 or higher)
Click or to broadcast recording
start and stop commands to the connected
DVRs.
2
TIMER RECORD
(User Level: ID3 or higher)
Click or to broadcast "ON/OFF"
commands for the timer button (
on the toolbar to display the BROADCAST
3
MENU UPLOAD (User Level: ID4)
This broadcasts menu setting data that is
stored on the computer's hard disk (data that
has been saved using the "SAVE" command)
to all connected DVRs.
1
Click
A dialog box will be displayed.
2
Select the required menu file that has
).
been saved, and then click [Open].
The selected filename will be displayed in
the "FILENAME" box of the "MENU
UPLOAD" window.
You should first save the menu setting
details into a file before using this
function.
3
Click
The menu settings will be transmitted.
You can select whether or not to transmit
the "CAMERA TITLE" and "MOTION
SENSOR" settings. If you would like these
settings to be transmitted, select the
corresponding check boxes.
52
' ' '
(User Level: ID3/4)
.
.
English