Table of Contents
Advertisement
. ' # ) A 9 # 8 # 5 9 ) $ D Q Q M T V R ' ' ' ' ' ' ' '
BASIC NETWORK SETTINGS
Menu Settings: MENU Window (P.39)
This window contains the following seven tabs. They are used to
carry out operations such as setting recording conditions and setup
environments for selected DVRs.
If you specify a DVR and then click
window, or if you double-click the name of a DVR and carry out the
selection operations given in the dialogue box, the information for
the selected DVR will be loaded and the window will become active.
1
LANGUAGE/D.S.TIME SET tab
This is used to make settings such as the display language for
the monitor connected to the DVR, daylight saving settings, and
also lets you adjust the time for connected peripheral devices.
(With the DSR-M810, the "REMOTE SET" settings can also be
carried out.)
2
REC MODE SET tab
This is used to set the recording conditions for DVRs.
3
TIMER REC SET tab
This is used to set timer recording conditions for DVRs.
4
HOLIDAY SET tab
This is used to set holiday settings.
5
DISPLAY/BUZZER SET tab
This is used to set the display information for the monitor
connected to the DVR, and also lets you make warning buzzer
settings.
6
MONITOR SET tab (DSR-M804/M814 only)
This is used for monitor window settings at the DVR.
7
TITLE/MOTION SET tab (DSR-M804/M814 only)
This sets the motion sensor and camera title settings for each
DVR channel.
7TITLE/MOTION SET tab
in the "MENU"
6MONITOR SET tab
18
' ' '
(User Level: ID4)
C
1LANGUAGE/
D.S. TIME SET tab
2REC MODE SET tab
3TIMER REC SET tab
4HOLIDAY SET tab
5DISPLAY/BUZZER SET tab
Advertisement
Table of Contents
