Alarm Recording - Sanyo VA-SW814 Instruction Manual

.  ' # ) A 9 # 8 # 5 9    ) $  D Q Q M   T V R ' ' ' ' ' '  ' '   
RECORDING IMAGES
Alarm Recording (User Level: ID4)
If an external alarm (sensor switch that is
installed to the alarm input terminal of the DVR)
or a motion sensor detects a problem, recording
of alarm images starts automatically.
1
Use the "REC MODE SET" tab window in
the "MENU" window to set the alarm
recording conditions. (P.41)
2
When an alarm such as from an intruder
is detected, the ALARM indicator on the
DVR will illuminate and alarm recording
will start automatically.
3
Once the specified alarm recording
duration has elapsed, the ALARM
indicator will switch off and alarm
recording will stop automatically.
Alarm recording images can be
searched for using the search
function. (P.70)
English
' ' '
The following limitations apply to alarm
recording operation.
(1) Immediately after the recording
operation starts
(2) Immediately after the [PICTURE
QUALITY] or [AUDIO RECORDING]
menu setting has been changed and
the display has returned to the
camera window.
For (1) and (2):
•
Alarm input will not be received for
a maximum period of 4 seconds,
but alarm input can be received
after that.
•
Recording of images as a result of
alarm input will not be carried out
for a maximum period of 6
seconds.
(3) Immediately after recording ends
•
Alarm input will not be received for
a maximum period of 5 seconds,
but alarm input can be received
after that.
•
Recording of images as a result of
alarm input will not be carried out
for a maximum period of 10
seconds.
The following limitations apply to
normal recording and timer recording
operation.
•
Normal recording and timer recording
operations cannot be received
immediately after the "PICTURE
QUALITY" or "AUDIO RECORDING"
menu settings are changed and the
display has returned to the camera
window, and recording operation is
not possible for a maximum period of
6 seconds.
•
Normal recording and timer recording
operations cannot be received
immediately after a recording
operation ends, and recording will
not be carried out for a maximum
period of 10 seconds.
67