Table Of User Options - Braeburn 7500 User Manual

Table of User Options

NOTE: Some user options may not be available, depending on how your thermostat was configured in the
Installer Settings (see Installer Manual). A detailed description of each User Option follows this table.
No. User Options
1 Filter Service
Monitor
2 UV Light Service
Monitor
3 Humidifier Pad
Service Monitor
4 Extended Hold Period
5 Temporary Override
Adjustment Limit
6 Program Override
Time Limit
7 Thermostat Lock Code
User Manual
Factory Setting
Default Options
OFF OFF
30, 60, 90,
120, 180, 365
OFF OFF
180, 365
OFF OFF
180, 365
LONG LONG
24HR
0 ADJ 0, 1, 2, or 3
ADJ 0
4 TEMP 4, 3, 2 or 1
TEMP
000 0-9
Comments
Disables filter service monitor feature.
Selects a number of days that must pass before the
thermostat will flash a Service Filter reminder
in the display screen.
Disables UV service monitor feature.
Selects a number of days before the thermostat will
flash a Service UV reminder in the display screen.
Disables pad service monitor feature.
Selects a number of days before the thermostat will
flash a Service Humid reminder in the display screen.
Selects long (permanent) hold mode.
Selects 24 hour (temporary) hold mode.
Selects a temporary temperature adjustment limit of
0 (disabled), 1˚, 2˚ or 3˚.
Selects a temporary program override time limit of
1, 2, 3 or 4 hours.
Select a 3 digit lock code of 0-9 for each digit.
10
Pg.
11
11
11
11
12
12
12