Setting User Options; Advanced User Options; Table Of User Options - Braeburn 5020 User Manual

2 Setting User Options

Advanced User Options

User options allow you to customize some of your
thermostat's features. The default user options are
compatible with most applications, therefore it is
not required that you adjust them.
To access the User Options menu, press and hold
the RETURN button for approximately 3 seconds
until the screen changes and displays the first
User Option.
Press the SpeedBar or to change the
®
setting for the displayed User Option. After you
have changed your desired setting, press NEXT
(HOLD) to advance to the next User Option. You may
also press BACK (PROG) to move backwards through
the User Options.
RETURN
When your changes are complete, press
User Manual
INSTRUCTIONS
INSTRUCTIONS
DAY/TIME
BACK NEXT
to exit.
DAY/TIME
8

Table of User Options

NOTE: Some user options may not be available, depending on how your thermostat was configured in the
Installer Settings (see Installer Manual). A detailed description of each User Option follows this table.
No. User Options Factory Setting
Default Options
OFF OFF
1 Filter Service
30, 60, 90,
Monitor
120, 180, 365
OFF OFF
2 UV Light Service
180, 365
Monitor
OFF OFF
3 Humidifier Pad
180, 365
Service Monitor
LONG LONG
4 Extended Hold Period
24HR
0 ADJ 0, 1, 2, or 3
5 Temporary Override
ADJ 0
Adjustment Limit
4 TEMP 4, 3, 2 or 1
6 Program Override
TEMP
Time Limit
000 0-9
7 Thermostat Lock Code
Comments
Disables filter service monitor feature.
Selects a number of days that must pass before the
thermostat will flash a Service Filter reminder
in the display screen.
Disables filter service monitor feature.
Selects a number of days before the thermostat will
flash a Service UV reminder in the display screen.
Disables filter service monitor feature.
Selects a number of days before the thermostat will
flash a Service Humid reminder in the display screen.
Selects long (permanent) hold mode.
Selects 24 hour (temporary) hold mode.
Selects a temporary temperature adjustment limit of
0 (disabled), 1˚, 2˚ or 3˚.
Selects a temporary program override time limit of
1, 2, 3 or 4 hours.
Select a 3 digit lock code of 0-9 for each digit.
9 User Manual
Pg.
10
10
10
10
11
11
11