Setting User Options; Table Of User Options - Braeburn 2020NC Detailed Installer Manual

5 Setting User Options

Advanced User Options
User options allow you to customize some of your thermostat's features.
The default user options are compatible with most applications, therefore it
is not required that you adjust them.
To access the User Options menu, hold down both the
for approximately 3 seconds until the screen changes and displays
the first User Option.
Press the or button to change the setting for the displayed User Option.
After you have made your desired setting, press and together to
advance to the next User Option.
The thermostat will return to normal mode after your last user option is
made or after no keys have been pressed for 15 seconds.

Table of User Options

User
No. Options
1
1st stage
differential
2
2nd stage
differential
(2220NC Only)
Extended
3
Hold Period
Filter
4
Service
Monitor
Adaptive
5
Recovery
Mode(ARM
Detailed Explanation of User Options:
Temperature Differential
(User Option 1 and 2)
The differential setting is the temperature control range that your thermostat
will provide. The smaller the setting, the tighter your range of temperature
control and comfort will be. The 2nd stage differential is only for systems
with a second stage of heating (auxiliary heat).
Factory Setting
Default Options
0.5 0.5, 1.0
or 2.0
2.0 1.0, 2.0,
3.0, 4.0,
5.0 or 6.0 (.5˚, 1˚, 1.5˚, 2˚, 2.5˚ or 3˚C)
LNG
LNG
24HRS
OFF
OFF
30, 60, 90, Selects a number of days before
180, 365
OF REC
OF REC
)
TM
ON REC
Comments
Select a 1st stage temperature
differential of .5˚, 1˚ or 2˚F (.25˚, 5˚
or 2˚C)
Select a 2nd temperature
differential of 1˚, 2˚, 3˚, 4˚, 5˚ or 6˚F
Selects long (permanent) hold mode
Selects 24 hr. (temporary) hold mode
Disables filter service monitor feature
the thermostat will flash a Service
Filter reminder in the display.
Disables adaptive (early)
recovery mode
Enables adaptive (early)
recovery mode
7
and buttons