Additional Operation Features; Auto Changeover Mode - Braeburn 7500 User Manual

Universal programmable wireless thermostat kit for systems up to 3 heat / 2 cool

Hide thumbs Also See for 7500:

Table of Contents

5 Additional Operation Features

Auto Changeover mode is a feature enabled/

disabled in the Installer Settings (see Installer

Guide). If enabled, it is selected by pressing the

SYSTEM button until AUTO HEAT or AUTO COOL

appears in the display.

When Auto Changeover mode is enabled and

selected, the system automatically switches

between heating and cooling when the room

temperature meets the programmed heating or

cooling set points. To operate properly, the

thermostat requires a "dead band" setting to

eliminate program conflicts. The dead band is set

in the Installer Settings (See Installer Guide). The

default setting is 3° F. Therefore, you will not be able

to set your heat or cool temperature within 3° F of each other. If a setting is made in either heating or cooling

which violates the dead band, the opposite mode will adjust up or down automatically to maintain the pro-

grammed dead band spacing.

User Manual

Table of Contents

Show Quick Links

Table of Contents