Universal programmable smart wi-fi thermostat.
up to 3 heat / 2 cool heat pump
up to 2 heat / 2 cool conventional
with wireless humidity control (17 pages)
Getting Started Install and wire the control module to the HVAC equipment (see Installer Guide, Section 2, Part 1). Install 2 supplied AA batteries into the thermostat (See Installer Guide, Section 2, Part 4). NOTE: Thermostat can be battery powered or 24 VAC powered (hardwired).
Page 3
Pair the Thermostat and Control Module On the thermostat, press and hold down the HOLD and RETURN buttons for 3 seconds. The word CMOD (control module) will appear in the display and the symbol will flash (see Figure 1). DAY/TIME NOTE: If the control module has already been paired, the symbol will not be flashing.
Page 4
On the powered control module, press and hold the CONNECT button for 3 seconds (see Figure 2). The control module will enter pairing mode for 60 seconds. During this time the blue COMM indicator on the control module will Connect Button flash once every 2 seconds.
Complete Installation Mount the thermostat (see Installer Guide, Section 2, Parts 2-5). If applicable, install and connect any wireless remote accessories (see Accessory Manual). Configure Thermostat Installer Settings based on your particular application (see Installer Guide, Section 4). If desired, adjust User Settings, Time of Day and Program Schedule (see User Manual).