Humidification and Dehumidification
If this thermostat was also equipped with
a wireless humidity sensor, it can be used to
control a whole house humidifier or dehumidifier.
Humidification can be controlled manually from
the thermostat or automatically when a outdoor
remote sensor is installed and configured in the
Installer Settings (See Installer Guide).
HUMID
To view the current humidity level at the thermostat,
press the DAY/TIME and RETURN buttons at the
same time (Figure 1). If humidification and
DAY/TIME
dehumidification are not enabled, you will only see
the current humidity level.
Figure 1
If humidification is enabled you will see the current humidity
level along with the humidification set point (Figure 2). Press the
SpeedBar
up or down to adjust the humidification set point.
®
HUMID
Figure 2
User Manual
36