Table of Contents
Advertisement
SONIC-
Item code: BH86
*If possible, first attempt to balance the model
by changing the position of the receiver bat-
tery and receiver. If you are unable to obtain
good balance by doing so, then it will be nec-
essary to add weight to the nose or tail to
achieve
the
proper
CONTROL THROWS.
1) We highly recommend setting up a
plane using the control throws listed.
2) The control throws should be meas-
ured at the widest point of each control sur-
face.
3) Check to be sure the control surfaces
move in the correct directions.
Ailerons :
12 mm up
Elevator :
10 mm up
.
balance
point.
12 mm down
10 mm down
12
12
Aileron Control
10
10
INSTRUCTION MANUAL
PRE-FLIGHT CHECK.
1) Completely charge your transmitter and
receiver batteries before your first day of fly-
ing.
2) Check every bolt and every glue joint in
your plane to ensure that everything is tight
and well bonded.
3) Double check the balance of the
airplane.
4) Check the control surface.
5) Check the receiver antenna . It should
be fully extended and not coiled up inside the
fuselage.
6) Properly balance the propeller.
We wish you many safe and enjoyable
flights with your SONIC.
11
Advertisement
Table of Contents
