Create Directory Entries; Create A New Directory Entry - AT&T CL84115 Complete User's Manual

Directory

Create directory entries

Create a new directory entry

Using a cordless handset or the telephone base:
1. Press MENU/
2. Press q or p
CID
/�ELECT.
MENU
3. Press q or p
CID
/�ELECT.
MENU
4. Use the dialing keys to enter a telephone number (up to
30 digits) when prompted.
Press q
•
CID
or right.
• Press
MUTE
telephone base to erase a digit.
• Press and hold
X/DELETE on the telephone base to erase all digits.
• Press and hold
dialing pause (a p appears).
-OR-
Copy a number from the redial list by pressing REDIAL/
p or pressing REDIAL/
DIR
/�ELECT to copy the number.
MENU
/�ELECT to move on to the name.
5. Press
MENU
• The display shows Number already saved if the number
is already in the directory. You cannot save the same
number twice.
6. Use the dialing keys to enter a name (up to 15 characters)
when prompted. Each time you press a key, the character
on that key appears. Additional key presses produce other
characters on that key. See the chart on the following page.
• Press q
CID
or right.
• Press 0 to add a space.
• Press
MUTE
the telephone base to erase a character.
• Press and hold
telephone base to erase all characters.
Press TONE to change the next letter to upper or lower case.
•
in idle mode to enter the main menu.
�ELECT
to scroll to Directory, then press
DIR
to scroll to Add contact, then press
DIR
or p
to move the cursor to the left
DIR
/DELETE on the handset or X/DELETE on the
/DELETE on the handset or
MUTE
/�AU�E to enter a three-second
REDIAL
�AU�E
or p to move the cursor to the left
DIR
/DELETE on the handset or X/DELETE on
/DELETE on the handset or X/DELETE on the
MUTE
repeatedly to locate the number. Press
55
Answering sys
>Directory
Review
>Add contact
ENTER NUMBER
888-883-2445 _
, then q
�AU�E CID
ENTER NAME
Robert Brown_
Saved
,